HOME | ABOUT US | PRODUCTS | CLIENTS | DEALERS | CERTIFICATES | CONTACTS
 
Advance Lightning Conductor
Earthing Electrode
Surge Arresters
Backfill Compound
Power Supply
Lithium Battery
Variable Wiring Interface Cables
Inter Bus
Connection Systems
 
 
(Enter your email address here)
 
 
QUINT SERIES
Compact power Supply units of the new QUINT POWER generation maximize system availability. Even standard power circuit- breakers can be triggered quickly and reliably with SFB technology (Selective Fuse breaking Technology) with six times the nominal current for 12ms. Defective current paths are selectively disconnected the defect is limited and the important system parts remain in operation. A comprehensive diagnosis is made by continuously monitoring the output voltage and current. This preventive function monitoring visualizes the critical operating modes and reports them to the control unit before an error occurs. QUINT POWER guarantees superior system availability. QUINT POWER Supply offers the best conditions for universal operation worldwide with a wide-range input of 85-264V AC for all Single-Phase device, and 320-575V AC for all Three-Phase devices. Even if there is a power sag for more than 20ms, or phase failure, QUINT POWER still provides the full output. Efficiently Selective Securing Using SFB Technology:
 
This replacement Cutler Hammer battery is rated at 6V, 5000 Mah It is designed specifically for your device. It is manufacturered to a very high standard to enhance the performance of your device.
In order to be able to trigger standard power circuit-breakers magnetically and quickly, power supply units must be able to supply multiple nominal Current for a short period. With SFB technology (Selective Fuse breaking Technology) with six times the nominal current for 12ms, this current reserve is always available.
 
Features
Fast tripping of standard circuit breakers
Dynamic SFB technology power reserve with up to six times the nominal current for 12ms
Indicates critical operating states before errors occur, thanks to permanent monitoring of the output voltage and output current
Remote monitoring using active switching outputs and floating relay contact
Reliable starting of difficult loads
POWER BOOST static power reserve with up to 1.5 times the nominal current permanently
Easy-maintenance connection technology
Coded COMBICON plug-in connectors (up to and including 10 A)
Minimize installation costs
Third negative terminal block for grounding on the secondary side
Compensation of voltage drops
Output voltage can be set on the front
A voltage range of 5 … 56 V DC can be covered with three power supply units with output voltages of 12, 24, and 48 V DC
Saves over 50% space in the control cabinet
Narrow design, e.g. 40 A output current in 96 mm narrow housing
Robust design
Metal housing and wide temperature range from -25 °C to +70 °C
Device start at -40 °C (type-tested)
Dip coating enables use in applications that are exposed to oxidizing and sulfidizing with humidities of up to 100%, or environments with dust, chemicals, and temperature extremes (2320908, 2320911, 2320898, and 2320924)
 
 
TRIO Power Supplies - The Power to choose the best supply for your application     
The performance and reliability of a power supply is critical to the operation of control systems. Phoenix Contact power supplies are designed to meet exceed the demands of modern control systems in general purpose. Industrial and even mission critical applications. The comprehensive approval package with CB scheme and UL approval simplifies international applications.
 
The power supply is also suitable for use in series machine manufacture. It offers basic functions at a very high level. The wide range input of 85-264V for Single Phase and 3X320-375AC for Three Phase AC enables worldwide use.
 
The MTBF of 500,000h as well as the dielectric strength up to 300V ensures a high operating reliability. Even at high operating temperatures up to 55°C, the devices delivery the nominal values. The power supply units can be connected in parallel to increase the capacity and redundancy.
 
The LED function monitoring simplifies the start up. A third minus terminal simplifies the grounding on the secondary side. All power supply units are short circuit proof and provide a regulated and adjustable output voltage of 22.5VDC to 29.5VDC.

FEATURES

Input Voltage range AC Only  
Output Voltage Range : 24V DC
Current Rating Range : 2.5A Upto 40Amp.
1Φ & 3Φ Version Available.
POWER BOOST Technology means 50% Current Consumption.
Short Circuit Protection
Surge Voltage Protection
 
 
Mini Power Supply.
With design widths of only 22.5, 45 and 67.5mm, the MINI POWER supply units are particularly slim and space saving.
 
The 85-264V AC or 90-350V DC wide range input and an international approvals package offer the best conditions for worldwide use. High operating safety is guaranteed by the mains failure bridging time of more than 20ms under full load.
 
Preventive function monitoring is professionally guaranteed via an active switching output for remote diagnosis. The parallel connection of the power supply units provides an increase in performance or redundancy. Due to the wide temperature range, the devices are suitable for operation from -25° C to + 70° C. Other advantages are clear LED signaling, adjustable output voltage and optimum device connections.
 
 

FEATURES

Input Voltage range AC Only
Output Voltage Range : 5V DC/10-15V DC/24V DC
Current Rating Range : 1A/1.3A/1.5A/2A/3A/4A/5A/8A
Surge Voltage Protection
DC TO DC Converter
 
 
UNO Power
Phoenix Contact UNO POWER DIN Rail Power Supply provides a compact solution for applications requiring up to 100W of power. Designed for low-cost, basic functionality, UNO POWER is available with three performance classes: 30W, 60W, and 100W. Housing widths of 22.5mm, 35mm, and 55mm, make the series ideal for compact control boxes. Maximum energy efficiency is provided with more than 90% across the operating range of -25ºC to 70ºC, as well as idle losses below 0.3W. Select models are certified according to UL 1310/508 Listed Class 2. 
 
 
Features
Higher power density than competitors — by 10-20 percent — and tailored to all conventional 120mm control cabinets
High efficiency — more than 90 percent — reducing energy costs
Basic functionality for 24V DC and 12V DC requirements, making it a reliable power supply for low-cost applications
Wide operating temperature range of -25ºC to 70ºC, making it flexible for all applications
Wide-range input of 85 to 264V AC for worldwide use
More than 700,000-hour MTBF rating at full nominal load
10 new models offer more amperage, voltage and power ratings to meet most applications. 
 
 
STEP POWER - The reliable space saver
With an assembled depth of just 61mm and a two-stepped housing, these low profile modules are the perfect size for installation in small distribution boards and operator panels
 
The device family covers the complete voltage range of 5, 12, 15, 24 and 48 V DC. A wide-range input and long mains-failure bridging times set standards the world over. A current reserve of up to 100 % ensures reliable startup of all loads. Parallel connections for increased performance and redundancy are further good reasons for using these reliable power supply units.
 
Features
U/I characteristic for capacitive load startup
Universal DIN rail and panel-mount design for industry and application flexibility
Wide range output voltage provides easy adjustment for voltage drops over long wiring runs
High efficiency ratings
NEC Class 2 designs available to meet building automation requirements
RoHS Compliant
 
Meanwell Power Supplies
AC input range selected by switch
Protections:Short circuit/Over load/Over voltage
Forced air cooling by built-in DC fan
100% full load burn-in test
Low cost
High reliability
2 years manufacture warrantyFixed switching frequency at 60KHz
 
 
Follow Us On:    
   
Privacy Policy | Career | Contact us  
 
Copyright © 2012 Subtle control (India) pvt. ltd., All rights reserved.     Designed by : Artech Creations